![]() YouTube is loaded with tips on how to make homemade anti-static wristbands. I take the graphic card totally apart and really get in there carefully. I do this to my laptop and desktop computer every 3 to four months. A lot of dust balls in there can cause it to short. Leaving this unchecked will run the settings in software mode. Check Use firmware control mode if you want the settings to be set in the GPU’s firmware. Check the Enable user-defined software automatic fan control. Click the Fan tab at the top of the popup window. ![]() Sometimes it also helps to change the paste since a lot of the times the old paste tends to completely dry up and crack into powder.Ī couple of times a year I unscrew my power supply (though not on laptop) and take it apart to get all of the dust out of it. Click the Settings button at the bottom of the window. Don t forget to replace the cooling paste which you put on the processor and cooler that is on the graphic card so it wont get overheated. Clean that out and it ll be running nice and cool again. Next, open Fan Speed Control then, select Fan Control Setting. Using the arrow keys, head over to the Monitor or Status option. Problems with overheating laptops are often due to accumulated dust in front of the suction. Then, based on your motherboard manufacturer, you will need to repeatedly press the Del, F2, F10, and F12 keys to load the BIOS menu. This means you have to detach the fans and coolers carefully and blow on it and in some cases use a toothbrush or something to get into those small openings such as q-tips with alcohol. ![]() This is often the solution for crashing, overheating and fan speeds spinning on full blast. Before you try to adjust fan speeds remember to clean your graphic card and processor fans from dust. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |